SVU-International Journal of Engineering Sciences and Applications

Author Index

A

A. Abd El-Rahman, Ahmed Energy and Exergy Analysis of the Heating Unit Components of Nag Hammadi Fiber Board Company [Volume 4, Issue 1, 2023, Pages 55-61]
A. Abdel Samee, Ahmed Performance augmentation of PV panels using phase change material cooling technique: A review [Volume 2, Issue 2, 2021, Pages 1-13]
A. Ahmed, Taiea. Review of Permanent Magnet Synchronous Motor Fed by Multilevel Inverter [Volume 1, Issue 1, 2020, Pages 22-31]
Abd, Zenaa Myasser Finite Element Analysis for Cylindrical and Balling Bearings Under Static and Dynamic Loads A-review paper [Volume 5, Issue 2, 2024, Pages 109-118]
Abdelaal, Omima High Robust Control Model of High Step Up Three Phase Y Source Inverters based on Model Predictive Control [Volume 4, Issue 2, 2023, Pages 76-83]
Abdelati, Mohamed H A case study of reducing the total wasted time for the bus movement of Public Transportation Authority in Cairo (CTA) [Volume 2, Issue 2, 2021, Pages 82-87]
Abdelazeem, Mohamed Investigation of Xiaomi 11T Single-Frequency GPS Positioning for Static Applications [Volume 5, Issue 2, 2024, Pages 1-6]
Abd El-Fatah, Shady A Comparative Study of Different Control Methods for Anti-Lock Braking System (ABS) [Volume 2, Issue 1, 2021, Pages 27-34]
Abdel-Gaber, G T A Review on Failure Analysis of Date Palm Fiber Reinforced Polymer Composites [Volume 5, Issue 1, 2024, Pages 99-110]
Abdelgawwad, K A A case study of reducing the total wasted time for the bus movement of Public Transportation Authority in Cairo (CTA) [Volume 2, Issue 2, 2021, Pages 82-87]
Abdelhameed, Esam H Ultimate Transformerless Boost DC-DC Converter for Renewable Energy Applications [Volume 2, Issue 2, 2021, Pages 63-69]
Abd El-Hameed, Anwer Dual Polarized Antenna with Wide Beamwidth Utilizing TM01 Mode for X-Band Applications [Volume 5, Issue 2, 2024, Pages 86-92]
Abdel - Jaber, Gmal T. A Review on Properties, Applications and Feasibility Study of Date Palm Fiber-Reinforced Polymer Composites [Volume 5, Issue 2, 2024, Pages 50-61]
Abdel-Jaber, G. T. Machine Learning Method for Solar PV Output Power Prediction [Volume 3, Issue 2, 2022, Pages 123-130]
Abdel-Jaber, G. T. Influence Parameters on the Essential Work of Fracture of 5754-H111 Aluminum Alloy Plate: Comparative Study [Volume 4, Issue 2, 2023, Pages 243-259]
Abdel-Jaber, Gamal T. Design and Implementation of a Prototype of Elevator Control System: Experimental Work [Volume 3, Issue 2, 2022, Pages 80-86]
Abdel-Jaber, G T Dynamic Performance Improvement of Pitch Angle Control Using PID and PIDA Controllers for Wind Generation Systems [Volume 1, Issue 1, 2020, Pages 32-36]
Abdel-Jaber, G. T. An enhanced network design of natural gas pipelines by controlling gas flow: considering supply reliability and operation efficiency [Volume 4, Issue 1, 2023, Pages 91-99]
Abdel-Jaber, G.T. Membrane Technology for Groundwater Purification : A review [Volume 1, Issue 1, 2020, Pages 8-21]
Abd Elkawy, Abeer Ahmed A Framework of EBRD Green Urbanism Program for Developing New Egyptian Cities by Using GIS and Remote Sensing (Case Study: Six October City) [Volume 4, Issue 2, 2023, Pages 47-75]
Abd Elkawy, Abeer Ahmed Principles of Infill Development Policy towards Sustainable Urban Containment in Residential Areas [Volume 4, Issue 2, 2023, Pages 119-148]
Abdellah, Mohammed Y. Influence Parameters on the Essential Work of Fracture of 5754-H111 Aluminum Alloy Plate: Comparative Study [Volume 4, Issue 2, 2023, Pages 243-259]
Abdellah, Mohammed Y. A Review on Failure Analysis of Date Palm Fiber Reinforced Polymer Composites [Volume 5, Issue 1, 2024, Pages 99-110]
Abdellah, Mohammed Y. A Review on Properties, Applications and Feasibility Study of Date Palm Fiber-Reinforced Polymer Composites [Volume 5, Issue 2, 2024, Pages 50-61]
Abdel-Nasser, Mohamed Gamma Effect in Face Detection Methods [Volume 4, Issue 1, 2023, Pages 79-84]
Abdel-Rahim, Omar M Ultimate Transformerless Boost DC-DC Converter for Renewable Energy Applications [Volume 2, Issue 2, 2021, Pages 63-69]
Abdel-Rahman, Adel Bedair Compact 500 MHz Coupled Resonators Design Analyzed by J-Inverters for Wireless Power Transfer (WPT) Utilization [Volume 2, Issue 2, 2021, Pages 70-75]
Abd El Raouf, Moamen Study of Seismic Response of Mechanically Stabilized Earth Wall [Volume 5, Issue 2, 2024, Pages 129-139]
Abd El-sadek, M.S. Membrane Technology for Groundwater Purification : A review [Volume 1, Issue 1, 2020, Pages 8-21]
Abdelsamee, Ahmed Abdelhady Exergoeconomic Improvement of Power Boiler in Paper Industry at Different Operating Modes [Volume 3, Issue 2, 2022, Pages 1-10]
Abdelsattar, Montaser Improved LVRT Techniques for Grid-Connected DFIG Wind Turbines: A Technical Review [Volume 4, Issue 2, 2023, Pages 7-23]
Abdelsattar, Montaser Comparative study on conventional and advanced techniques MPPT algorithms for solar energy systems [Volume 4, Issue 2, 2023, Pages 291-302]
Abdelsattar, Montaser Optimizing Grid-Dependent Hybrid Renewable Energy System with the African Vultures Optimization Algorithm [Volume 5, Issue 1, 2024, Pages 89-98]
Abdelsattar Mohamed Saeed, Montaser A Review on Hybrid Electrical Vehicles: Architectures, Classification and Energy Management [Volume 5, Issue 2, 2024, Pages 93-99]
Abdelsattar Mohamed Saeed, Montaser Comparative Analysis of Machine Learning Techniques for Fault Detection in Solar Panel Systems [Volume 5, Issue 2, 2024, Pages 140-152]
Abdelwahab, Mohamed Ahmed Robust Traffic Congestion Recognition in Videos Based on Deep Multi-Stream LSTM [Volume 3, Issue 1, 2022, Pages 91-97]
Abd El-Wahab, Mohammed Rabie A case study of reducing the total wasted time for the bus movement of Public Transportation Authority in Cairo (CTA) [Volume 2, Issue 2, 2021, Pages 82-87]
Abdul Hasan Abdul Karem, Alyaa Organic solar cells: a short review [Volume 4, Issue 2, 2023, Pages 1-6]
Abdul Hasan Abdul Karem, Alyaa Eco-Friendly Flame-Retardant Solutions: Repurposing Polystyrene Waste into Fire-Resistant Polymers [Volume 5, Issue 1, 2024, Pages 39-48]
Abdulwahid Sarray, Anmar Life Cycle Cost Analysis for Conventional and Sustainable Slabs in Iraq [Volume 3, Issue 1, 2022, Pages 37-48]
Abid, Zenaa Moyaser Effect of Friction Stir Welding Parameters on Welding Joint Characteristics : A review [Volume 4, Issue 2, 2023, Pages 90-97]
Abid Gader, Zenaa Moyaser A review on the development of mechanical properties of polyester /epoxy resins reinforced with different powders /fibers materials [Volume 3, Issue 2, 2022, Pages 93-105]
Abouelsoud, Mostafa Evaluation of New Composite Adsorbents for Solar-Driven Adsorption Refrigerator [Volume 2, Issue 2, 2021, Pages 76-81]
Abouelsoud, Mostafa Energy and exergy analysis of a sugar cane factory in Egypt [Volume 5, Issue 2, 2024, Pages 43-49]
Abuelhaag, Anas An Integrated IoT Smart Cane for the Blind and Visually Impaired Individuals [Volume 5, Issue 1, 2024, Pages 71-78]
Abuelmakarem, Hala S. An Integrated IoT Smart Cane for the Blind and Visually Impaired Individuals [Volume 5, Issue 1, 2024, Pages 71-78]
Abu-Elwfa, Salah Saber A Review on Hybrid Electrical Vehicles: Architectures, Classification and Energy Management [Volume 5, Issue 2, 2024, Pages 93-99]
Abulela, Elsayed A. A. Mode Choice Effect on the Number of En-route Travelers and Arrival Rates in an Urban Transport Network [Volume 5, Issue 2, 2024, Pages 100-108]
Abu Zeid, Mahmoud Mohamed Mechanical Properties of Soft Clay Soil Reinforced by Carbon Fibers [Volume 4, Issue 2, 2023, Pages 180-186]
A. Elbaset, Adel Improved LVRT Techniques for Grid-Connected DFIG Wind Turbines: A Technical Review [Volume 4, Issue 2, 2023, Pages 7-23]
A. H., El-Abd Improving the Tribological and Tribo-Electrification Properties of Epoxy Flooring Materials [Volume 3, Issue 2, 2022, Pages 47-57]
A. H., El-Abd Influence of Counterface Materials on the Tribological Behavior of Dental Polymethyl Methacrylate Reinforced by Single-Walled Carbon Nanotubes (SWCNT) [Volume 3, Issue 2, 2022, Pages 68-79]
Ah-Ali Dhawalbeit, Madina Real Time Face Recognition Technique for Institutional Healthcare’s Security System [Volume 4, Issue 2, 2023, Pages 173-179]
A. Hemada, Amr Density Control of Sandy Soil in Laboratory Model [Volume 3, Issue 2, 2022, Pages 137-143]
Ahmed, Emtithal Real Time Face Recognition Technique for Institutional Healthcare’s Security System [Volume 4, Issue 2, 2023, Pages 173-179]
Ahmed, Hassan Safi Optimal flow pattern around hybrid groins with various orientations to improve fish habitat via Experimental Investigation using Acoustic Doppler Velocimeter [Volume 4, Issue 2, 2023, Pages 98-106]
Ahmed, Md Ashik A Machine Learning Approach to Understand the Impact of Temperature and Rainfall Change on Concrete Pavement Performance Based on LTPP Data [Volume 5, Issue 1, 2024, Pages 150-155]
Ahmed, Md Ashik Forms, Importance and Sources of Dissolved Organic Nitrogen (DON) in the Environment: A Review [Volume 5, Issue 2, 2024, Pages 18-27]
Ahmed, Suha Hashim A review on the development of mechanical properties of polyester /epoxy resins reinforced with different powders /fibers materials [Volume 3, Issue 2, 2022, Pages 93-105]
Ahmed, Suha Hashim Studying the bending behavior of polymer-based composites reinforced with wires of different geometric shapes by numerical analysis method [Volume 4, Issue 2, 2023, Pages 209-215]
Ahmed, Suha Hashim Finite Element Analysis for Cylindrical and Balling Bearings Under Static and Dynamic Loads A-review paper [Volume 5, Issue 2, 2024, Pages 109-118]
A.Ibrahim, A. Review of Permanent Magnet Synchronous Motor Fed by Multilevel Inverter [Volume 1, Issue 1, 2020, Pages 22-31]
A.Ismeil, Mohamed Techno-economic Analysis of Hybrid Renewable Energy Systems Considering Demand Side Management [Volume 5, Issue 2, 2024, Pages 62-85]
Aissa, Walid Aniss Experimental Investigation of a Novel Thermosyphon Solar Water Heater Performance under Aswan Climate Conditions [Volume 5, Issue 2, 2024, Pages 119-128]
A. K., Ameer Improving the Tribological and Tribo-Electrification Properties of Epoxy Flooring Materials [Volume 3, Issue 2, 2022, Pages 47-57]
A. K., Ameer Influence of Counterface Materials on the Tribological Behavior of Dental Polymethyl Methacrylate Reinforced by Single-Walled Carbon Nanotubes (SWCNT) [Volume 3, Issue 2, 2022, Pages 68-79]
A. Kamal, Hussain Investigation of Xiaomi 11T Single-Frequency GPS Positioning for Static Applications [Volume 5, Issue 2, 2024, Pages 1-6]
Alabidalkreem, Omer S. Manufacture Dry Porous Carbonate Materials with Crack Free [Volume 4, Issue 2, 2023, Pages 187-193]
Alfadel Golam allh, Moh Real Time Face Recognition Technique for Institutional Healthcare’s Security System [Volume 4, Issue 2, 2023, Pages 173-179]
Alfouly, Ahmed Voltage Profile of Hosting Capacity Enhancement Based on Smart Inverter Reactive Power Control for PV Grid Connected System [Volume 4, Issue 2, 2023, Pages 234-242]
Alhasan, Bakr Noori Transformation of Conventional Mechanical Elements to Smart by Adding Sensors and Actuators to Composite Materials [Volume 4, Issue 2, 2023, Pages 84-89]
Ali, Ahmed S. Machine Learning Method for Solar PV Output Power Prediction [Volume 3, Issue 2, 2022, Pages 123-130]
Ali, Ahmed AbdelMonteleb Mohammed Comparative Life Cycle Assessment of Wall Painting Types in a New City Development: Impacts on Environment and Human Health [Volume 5, Issue 1, 2024, Pages 111-124]
Ali, Alaa F.M. Modelling and Experimental Analysis for Performance Improvement of Photovoltaic Module using Different Cooling Systems [Volume 4, Issue 2, 2023, Pages 318-330]
Ali, Amr Overcoming Challenges in the Powder Metallurgy Process of Metal Matrix Composites [Volume 5, Issue 1, 2024, Pages 13-18]
Ali, Essam Modelling and Experimental Analysis for Performance Improvement of Photovoltaic Module using Different Cooling Systems [Volume 4, Issue 2, 2023, Pages 318-330]
Ali, Mustafa M. Machine Learning Method for Solar PV Output Power Prediction [Volume 3, Issue 2, 2022, Pages 123-130]
Ali, Ramadan Hefny Exergoeconomic Improvement of Power Boiler in Paper Industry at Different Operating Modes [Volume 3, Issue 2, 2022, Pages 1-10]
Ali, Ramadan Hefny Energy and exergy analysis of a sugar cane factory in Egypt [Volume 5, Issue 2, 2024, Pages 43-49]
Ali, salwa Nasser Comprehensive Comparison Between the Experimental and Simulated characteristics of the Mono-Crystalline Silicon Solar Cell Using SCAPS-1D [Volume 4, Issue 2, 2023, Pages 165-172]
Ali, Samar Robust deep convolutional neural network-Based Classifiers [Volume 4, Issue 1, 2023, Pages 41-47]
Ali.Moh SK, Areej Real Time Face Recognition Technique for Institutional Healthcare’s Security System [Volume 4, Issue 2, 2023, Pages 173-179]
Al – Tememe, E. H. Organic solar cells: a short review [Volume 4, Issue 2, 2023, Pages 1-6]
Al-Rawy, Ammar Y.I. Integrated combined cycle system with parabolic trough technology: A comprehensive review [Volume 4, Issue 2, 2023, Pages 194-208]
Al-Sarraj, Ghaidaa Ibrahem Studying the bending behavior of polymer-based composites reinforced with wires of different geometric shapes by numerical analysis method [Volume 4, Issue 2, 2023, Pages 209-215]
Al-Sarraj, Ghaidaa Ibrahem Hybridization influence on the mechanical properties of hybrid composite laminates: A review [Volume 5, Issue 1, 2024, Pages 64-70]
Al-Sarraj, Ghaidaa Ibrahem Finite Element Analysis for Cylindrical and Balling Bearings Under Static and Dynamic Loads A-review paper [Volume 5, Issue 2, 2024, Pages 109-118]
Alsonny, Zeinab A. Procedural Framework for Assessing the Impact of New Cities Growth on Urban Heat Island, A Case Study of 6thOctober City [Volume 3, Issue 1, 2022, Pages 64-77]
A. M., Samy Improving the Tribological and Tribo-Electrification Properties of Epoxy Flooring Materials [Volume 3, Issue 2, 2022, Pages 47-57]
A. M., Samy Influence of Counterface Materials on the Tribological Behavior of Dental Polymethyl Methacrylate Reinforced by Single-Walled Carbon Nanotubes (SWCNT) [Volume 3, Issue 2, 2022, Pages 68-79]
Ameen, Asmaa Mahmoud Optimal flow pattern around hybrid groins with various orientations to improve fish habitat via Experimental Investigation using Acoustic Doppler Velocimeter [Volume 4, Issue 2, 2023, Pages 98-106]
A. M. Osman, Emad Density Control of Sandy Soil in Laboratory Model [Volume 3, Issue 2, 2022, Pages 137-143]
Argha, Debo Brata Paul A Machine Learning Approach to Understand the Impact of Temperature and Rainfall Change on Concrete Pavement Performance Based on LTPP Data [Volume 5, Issue 1, 2024, Pages 150-155]
Argha, Debo Brata Paul Forms, Importance and Sources of Dissolved Organic Nitrogen (DON) in the Environment: A Review [Volume 5, Issue 2, 2024, Pages 18-27]
Assar, Walaa Retrieval of Chlorophyll-a and vegetation indices Using Sentinel-2 MSI Imagery in El-Burullus Lake, Egypt [Volume 5, Issue 1, 2024, Pages 79-88]
Assem, Yasser Mohamed Robust deep convolutional neural network-Based Classifiers [Volume 4, Issue 1, 2023, Pages 41-47]
Atallah, Hany Compact 500 MHz Coupled Resonators Design Analyzed by J-Inverters for Wireless Power Transfer (WPT) Utilization [Volume 2, Issue 2, 2021, Pages 70-75]
Atallah, Hany Ahmed Automatic Modulation Classification: Convolutional Deep Learning Neural Networks Approaches [Volume 4, Issue 1, 2023, Pages 48-54]
Atallah, Hany Ahmed Improvement of the performance analysis of activation functions based on DLLSTM classifiers on Human Activity Recognition for classification [Volume 4, Issue 2, 2023, Pages 24-35]
Atallah, Hany Ahmed Dual Polarized Antenna with Wide Beamwidth Utilizing TM01 Mode for X-Band Applications [Volume 5, Issue 2, 2024, Pages 86-92]
Attalla, Mohamed Mohamed Effect of the tube material on the thermal performance of a Ranque-Hilsch vortex tube [Volume 1, Issue 1, 2020, Pages 37-44]
Ayman, Safa An Integrated IoT Smart Cane for the Blind and Visually Impaired Individuals [Volume 5, Issue 1, 2024, Pages 71-78]
A. Ziedan, Hamdy Modelling and Experimental Analysis for Performance Improvement of Photovoltaic Module using Different Cooling Systems [Volume 4, Issue 2, 2023, Pages 318-330]

B

Bahloul, Khaled Mohamed Numerical Simulation of Strip Footing Behavior on Reinforced Sabkha Soil [Volume 4, Issue 2, 2023, Pages 36-46]
Bahloul, Khaled Mohamed Study of Seismic Response of Mechanically Stabilized Earth Wall [Volume 5, Issue 2, 2024, Pages 129-139]
Bedair, Adel Robust deep convolutional neural network-Based Classifiers [Volume 4, Issue 1, 2023, Pages 41-47]
Bedair, Adel Gamma Effect in Face Detection Methods [Volume 4, Issue 1, 2023, Pages 79-84]
Bedair, Adel Improvement of the performance analysis of activation functions based on DLLSTM classifiers on Human Activity Recognition for classification [Volume 4, Issue 2, 2023, Pages 24-35]
Bedair, Adel Dual Polarized Antenna with Wide Beamwidth Utilizing TM01 Mode for X-Band Applications [Volume 5, Issue 2, 2024, Pages 86-92]

D

Diab, Ahmed A.Zaki Comprehensive Comparison Between the Experimental and Simulated characteristics of the Mono-Crystalline Silicon Solar Cell Using SCAPS-1D [Volume 4, Issue 2, 2023, Pages 165-172]
D.Y., Samuel Stress Analysis of Gear Pair Faults Using FEM [Volume 3, Issue 2, 2022, Pages 131-136]

E

Eldeep, Ahmed Urbanization and Environmental change: Local Effects of the International Coastal Road on Burg Elburullus City [Volume 3, Issue 1, 2022, Pages 29-36]
Elkady, Ahmed Urbanization and Environmental change: Local Effects of the International Coastal Road on Burg Elburullus City [Volume 3, Issue 1, 2022, Pages 29-36]
El-Naggar, Marwa Energy Efficiency Coupled with Lightweight Bricks: Towards Sustainable Building: A review [Volume 4, Issue 1, 2023, Pages 1-28]
Elnegm, Mahmoud Mohamed Compact 500 MHz Coupled Resonators Design Analyzed by J-Inverters for Wireless Power Transfer (WPT) Utilization [Volume 2, Issue 2, 2021, Pages 70-75]
El-saggan, Mahmoud Eid Experimental Investigation of a Novel Thermosyphon Solar Water Heater Performance under Aswan Climate Conditions [Volume 5, Issue 2, 2024, Pages 119-128]
El-Saies, M.M. Titanium Foam for Dental Implant Applications: A review [Volume 4, Issue 2, 2023, Pages 107-112]
El-Saies, M.M. Mechanical Evaluation of Open Pore Titanium Foam Obtained via Space Holder Method [Volume 4, Issue 2, 2023, Pages 149-154]
El-Shazly, A. H. Titanium Foam for Dental Implant Applications: A review [Volume 4, Issue 2, 2023, Pages 107-112]
El-Shazly, A. H. Mechanical Evaluation of Open Pore Titanium Foam Obtained via Space Holder Method [Volume 4, Issue 2, 2023, Pages 149-154]
El-sherif, Walaa eldin mohamed A study using F.E.A , theory and experiments for single helical piles in sand [Volume 4, Issue 2, 2023, Pages 260-268]
El-Wakad, M. T. Titanium Foam for Dental Implant Applications: A review [Volume 4, Issue 2, 2023, Pages 107-112]
El-Wakad, M. T. Mechanical Evaluation of Open Pore Titanium Foam Obtained via Space Holder Method [Volume 4, Issue 2, 2023, Pages 149-154]
Emad-Eldeen, Ahmed Comparative Analysis of Machine Learning Techniques for Fault Detection in Solar Panel Systems [Volume 5, Issue 2, 2024, Pages 140-152]
Emam, Esraa Magdy Attia Implementation of Green Freight Transport approach in Egypt: A case study of Port Said ports [Volume 5, Issue 1, 2024, Pages 136-149]
Essai, Mohamed Hassan Robust deep convolutional neural network-Based Classifiers [Volume 4, Issue 1, 2023, Pages 41-47]
Essai, Mohamed Hassan Automatic Modulation Classification: Convolutional Deep Learning Neural Networks Approaches [Volume 4, Issue 1, 2023, Pages 48-54]

F

Fahmy, Amany Performance augmentation of PV panels using phase change material cooling technique: A review [Volume 2, Issue 2, 2021, Pages 1-13]
Fathi, Mohmmed Shaalan Effect of Friction Stir Welding Parameters on Welding Joint Characteristics : A review [Volume 4, Issue 2, 2023, Pages 90-97]
Fathy Abuelkhair, Ahmed Comparative study on conventional and advanced techniques MPPT algorithms for solar energy systems [Volume 4, Issue 2, 2023, Pages 291-302]
Fawzi, Adelrahman Optimizing Grid-Dependent Hybrid Renewable Energy System with the African Vultures Optimization Algorithm [Volume 5, Issue 1, 2024, Pages 89-98]
FELOUPS, CATHRINE E. S. Comparative Analysis between Two Different Control PWM Techniques Based on a Reduced-Component Multilevel Inverter [Volume 1, Issue 1, 2020, Pages 1-7]

G

Gad, Mahmoud Mohamed Evaluation of Parameters Affecting the Performance of the Spark Ignition Engine [Volume 4, Issue 2, 2023, Pages 216-224]
Galal, Randa The Integrated Model of Governance and Management of Urban Development to Host and Rehabilitate (Reconciliation) of Forcibly Displaced Individuals [Volume 5, Issue 2, 2024, Pages 28-42]
G. Ameen, Asmaa Dynamic Performance Improvement of Pitch Angle Control Using PID and PIDA Controllers for Wind Generation Systems [Volume 1, Issue 1, 2020, Pages 32-36]
Ghazaly, Nouby M A Comparative Study of Different Control Methods for Anti-Lock Braking System (ABS) [Volume 2, Issue 1, 2021, Pages 27-34]
Ghazaly, Nouby A Review on the Performance Analysis of C.I Engine with Biofuel Blends [Volume 3, Issue 2, 2022, Pages 27-36]
Ghazaly, Nouby Injection and Combustion of biodiesel at different blends: A review [Volume 3, Issue 2, 2022, Pages 37-46]
Ghazaly, Nouby Energy and Exergy Analysis of the Heating Unit Components of Nag Hammadi Fiber Board Company [Volume 4, Issue 1, 2023, Pages 55-61]
Ghazaly, Nouby Influence Parameters on the Essential Work of Fracture of 5754-H111 Aluminum Alloy Plate: Comparative Study [Volume 4, Issue 2, 2023, Pages 243-259]
Gupta, Aditya Performance Enhancement of 10GHz Patch Antenna using DGS and Perforated Patch Configuration for Advanced Wireless Communication Systems [Volume 5, Issue 1, 2024, Pages 33-38]

H

H. Abd El-Hamid, Saddam Energy and Exergy Analysis of the Heating Unit Components of Nag Hammadi Fiber Board Company [Volume 4, Issue 1, 2023, Pages 55-61]
Hafez, Wessam Arafa Overcoming Challenges in the Powder Metallurgy Process of Metal Matrix Composites [Volume 5, Issue 1, 2024, Pages 13-18]
Hakeem, Beshoy M. Improvement of Bearing Capacity for Soft Soils Supported by Confined Footings and Sand Columns: A Numerical Study [Volume 3, Issue 1, 2022, Pages 1-7]
Hamdan, I. Voltage Profile of Hosting Capacity Enhancement Based on Smart Inverter Reactive Power Control for PV Grid Connected System [Volume 4, Issue 2, 2023, Pages 234-242]
Hamdan, I. A Review of Intelligent Control Systems for Grid Tie Doubly Fed Induction Generator Based Wind Farm [Volume 4, Issue 2, 2023, Pages 269-278]
Hamdan, I. Optimizing Grid-Dependent Hybrid Renewable Energy System with the African Vultures Optimization Algorithm [Volume 5, Issue 1, 2024, Pages 89-98]
Hamdan, Ibrahim Dynamic Performance Improvement of Pitch Angle Control Using PID and PIDA Controllers for Wind Generation Systems [Volume 1, Issue 1, 2020, Pages 32-36]
Hamdan, Ibrahim An Overview of Control Method with Various Crowbar Techniques of Wind Turbines during Power System Faults [Volume 2, Issue 1, 2021, Pages 35-45]
Hamdy, Omar Procedural Framework for Assessing the Impact of New Cities Growth on Urban Heat Island, A Case Study of 6thOctober City [Volume 3, Issue 1, 2022, Pages 64-77]
Hamdy, Omar Urban Risk Assessments: Framework for Identifying Land-uses Exposure of Coastal Cities to Sea Level Rise, a Case Study of Alexandria [Volume 3, Issue 1, 2022, Pages 78-90]
Hamdy, Osama Evaluation of New Composite Adsorbents for Solar-Driven Adsorption Refrigerator [Volume 2, Issue 2, 2021, Pages 76-81]
Hammash, Ayah The Environmental and Health Impact of Eco-friendly Textiles in the Interior Space [Volume 4, Issue 1, 2023, Pages 35-40]
Hammo, Khalid Elias Stress Analysis of a Rectangular Shaft Carrying a Rotor System Due to Eccentricity [Volume 4, Issue 1, 2023, Pages 29-34]
Hares, Essam Evaluation of New Composite Adsorbents for Solar-Driven Adsorption Refrigerator [Volume 2, Issue 2, 2021, Pages 76-81]
Hares, Essam An enhanced network design of natural gas pipelines by controlling gas flow: considering supply reliability and operation efficiency [Volume 4, Issue 1, 2023, Pages 91-99]
Hassan, Ibrahim Titanium Foam for Dental Implant Applications: A review [Volume 4, Issue 2, 2023, Pages 107-112]
Hassan, Ibrahim Mechanical Evaluation of Open Pore Titanium Foam Obtained via Space Holder Method [Volume 4, Issue 2, 2023, Pages 149-154]
Hassan, Tarek Mahmoud Yousry Implementation of Green Freight Transport approach in Egypt: A case study of Port Said ports [Volume 5, Issue 1, 2024, Pages 136-149]
Helmy, Mohamed Behavior and Correlations between different Mechanical Properties of Fly Ash-based Geopolymer Concrete [Volume 4, Issue 2, 2023, Pages 279-290]
Hemdan, Seham Mode Choice Effect on the Number of En-route Travelers and Arrival Rates in an Urban Transport Network [Volume 5, Issue 2, 2024, Pages 100-108]
H. H. Mousa, Hossam Performance assessment of speed controllers for Five-Phase PMSG with Integrated P&O MPPT algorithms Based Wind Energy Conversion Systems [Volume 3, Issue 2, 2022, Pages 58-67]
H. Kasem Alaboudy, Ali Improved LVRT Techniques for Grid-Connected DFIG Wind Turbines: A Technical Review [Volume 4, Issue 2, 2023, Pages 7-23]
H. Malk, Fatima Organic solar cells: a short review [Volume 4, Issue 2, 2023, Pages 1-6]
Hussin, Mohamed S. An enhanced network design of natural gas pipelines by controlling gas flow: considering supply reliability and operation efficiency [Volume 4, Issue 1, 2023, Pages 91-99]

I

Ibrahim, Ahmed Mohamed Optimal STATCOM for Performance Improvement of A Grid-Connected PV/Wind Hybrid Energy System: Case Study of Gabal El Zayt Region, Egypt [Volume 3, Issue 2, 2022, Pages 11-26]
Ibrahim, Vitta Abdel Rehim Towards a Sustainable Future: Exploring the Integration of Architecture Education, Innovation and Sustainability [Volume 5, Issue 1, 2024, Pages 49-63]
Ismael, Qays Hazim Investigation of mechanical properties of low carbon steel weldments for different welding processes [Volume 3, Issue 2, 2022, Pages 116-122]
Ismael, Qays Hazim Effect of Friction Stir Welding Parameters on Welding Joint Characteristics : A review [Volume 4, Issue 2, 2023, Pages 90-97]
Ismail, Ahmed Review of Distributed power electronics solutions for PV Generation systems [Volume 4, Issue 1, 2023, Pages 85-90]
Ismeil, Mohamed Ali Multi-Input Ćuk Inverter Based on Model Predictive Control [Volume 2, Issue 1, 2021, Pages 9-14]
Ismeil, Mohamed Ali Comparison Study between Three-phase Differential-mode Inverter and Semi Z-Source Inverter for Micro-Inverter Applications [Volume 2, Issue 2, 2021, Pages 48-54]
Ismeil, Mohamed Ali Optimal STATCOM for Performance Improvement of A Grid-Connected PV/Wind Hybrid Energy System: Case Study of Gabal El Zayt Region, Egypt [Volume 3, Issue 2, 2022, Pages 11-26]
Ismeil, Mohamed Smart Grid - reliability, Security, Self-healing standpoint, and state of the art [Volume 3, Issue 2, 2022, Pages 87-92]
Ismeil, Mohamed Review of Distributed power electronics solutions for PV Generation systems [Volume 4, Issue 1, 2023, Pages 85-90]
Ismeil, Mohamed Ali High Robust Control Model of High Step Up Three Phase Y Source Inverters based on Model Predictive Control [Volume 4, Issue 2, 2023, Pages 76-83]
Ismeil, Mohamed Ali Voltage Profile of Hosting Capacity Enhancement Based on Smart Inverter Reactive Power Control for PV Grid Connected System [Volume 4, Issue 2, 2023, Pages 234-242]
Ismeil, Mohamed Ali Micro Inverter Grid Connected for PV Application Based on SEPIC Differential Inverter [Volume 5, Issue 1, 2024, Pages 1-12]

J

Jharia, Bhavana Performance Enhancement of 10GHz Patch Antenna using DGS and Perforated Patch Configuration for Advanced Wireless Communication Systems [Volume 5, Issue 1, 2024, Pages 33-38]
J. Khadim, Hussein Water Quality Detection using cost-effective sensors based on IoT [Volume 3, Issue 1, 2022, Pages 98-103]

K

Kabeel, A. E A detailed Review of Solar Desalination Systems with Different Enhancement Methods [Volume 3, Issue 1, 2022, Pages 49-63]
Kamal, Alshima Hassan Influence Parameters on the Essential Work of Fracture of 5754-H111 Aluminum Alloy Plate: Comparative Study [Volume 4, Issue 2, 2023, Pages 243-259]
Kenawi, Mamdouh Abbas Mechanical Properties of Soft Clay Soil Reinforced by Carbon Fibers [Volume 4, Issue 2, 2023, Pages 180-186]
Khalil, Mohamed I A case study of reducing the total wasted time for the bus movement of Public Transportation Authority in Cairo (CTA) [Volume 2, Issue 2, 2021, Pages 82-87]
Khalil, Mohamed Energy and exergy analysis of a sugar cane factory in Egypt [Volume 5, Issue 2, 2024, Pages 43-49]
Khalil Ismail, Dunya Life Cycle Cost Analysis for Conventional and Sustainable Slabs in Iraq [Volume 3, Issue 1, 2022, Pages 37-48]
Khidhir, Awad H. Manufacture Dry Porous Carbonate Materials with Crack Free [Volume 4, Issue 2, 2023, Pages 187-193]
Khodary, Farag Mode Choice Effect on the Number of En-route Travelers and Arrival Rates in an Urban Transport Network [Volume 5, Issue 2, 2024, Pages 100-108]
Khodary Emara, Adel A Review on the Performance Analysis of C.I Engine with Biofuel Blends [Volume 3, Issue 2, 2022, Pages 27-36]
K. Obaed, Faik Water Quality Detection using cost-effective sensors based on IoT [Volume 3, Issue 1, 2022, Pages 98-103]

L

Lakousha, Mohammed Maher Con-LCCA V1.0: A Computerized Tool for Analyzing the Life Cycle Cost of Construction Projects. [Volume 4, Issue 1, 2023, Pages 62-78]
Lehtonen, Matti A Comprehensive Study of Power Distribution Planning Perspectives: Modelling, Tools, Goals, and Criteria [Volume 5, Issue 2, 2024, Pages 7-17]

M

Maghrabie, Hussein Mohamed Effect of the tube material on the thermal performance of a Ranque-Hilsch vortex tube [Volume 1, Issue 1, 2020, Pages 37-44]
Maghrabie, Hussein Performance augmentation of PV panels using phase change material cooling technique: A review [Volume 2, Issue 2, 2021, Pages 1-13]
Maghrabie, Hussein Mohamed Exergoeconomic Improvement of Power Boiler in Paper Industry at Different Operating Modes [Volume 3, Issue 2, 2022, Pages 1-10]
Maghrabie, Hussein Mohamed Energy and exergy analysis of a sugar cane factory in Egypt [Volume 5, Issue 2, 2024, Pages 43-49]
Mahmoud, Ayman Ragab The Influence of Buildings Proportions and Orientations on Energy Demand for Cooling in Hot Arid Climate [Volume 3, Issue 1, 2022, Pages 8-20]
Mahmoud, heba ahmed Improved LVRT Techniques for Grid-Connected DFIG Wind Turbines: A Technical Review [Volume 4, Issue 2, 2023, Pages 7-23]
Mahmoud, Karar A Comprehensive Study of Power Distribution Planning Perspectives: Modelling, Tools, Goals, and Criteria [Volume 5, Issue 2, 2024, Pages 7-17]
Maleki, Sajad Review of PV power ramp rate control methods and their requirements [Volume 2, Issue 2, 2021, Pages 14-25]
M. Aly, Mohamed A Review on Hybrid Electrical Vehicles: Architectures, Classification and Energy Management [Volume 5, Issue 2, 2024, Pages 93-99]
M. A. Mohamed, Ahmed Density Control of Sandy Soil in Laboratory Model [Volume 3, Issue 2, 2022, Pages 137-143]
M. Bahaaeldin, Hassanein The Integrated Model of Governance and Management of Urban Development to Host and Rehabilitate (Reconciliation) of Forcibly Displaced Individuals [Volume 5, Issue 2, 2024, Pages 28-42]
Mesalam, Abdelgayed Optimizing Grid-Dependent Hybrid Renewable Energy System with the African Vultures Optimization Algorithm [Volume 5, Issue 1, 2024, Pages 89-98]
M. Ghaniem, Gouda Behavior and Correlations between different Mechanical Properties of Fly Ash-based Geopolymer Concrete [Volume 4, Issue 2, 2023, Pages 279-290]
M. Ghazaly, Nouby Evaluation of Parameters Affecting the Performance of the Spark Ignition Engine [Volume 4, Issue 2, 2023, Pages 216-224]
Michitaka, Umemoto Urban Risk Assessments: Framework for Identifying Land-uses Exposure of Coastal Cities to Sea Level Rise, a Case Study of Alexandria [Volume 3, Issue 1, 2022, Pages 78-90]
M. Khairat Dawood, Mohamed A detailed Review of Solar Desalination Systems with Different Enhancement Methods [Volume 3, Issue 1, 2022, Pages 49-63]
M. Mansour, Tamer A detailed Review of Solar Desalination Systems with Different Enhancement Methods [Volume 3, Issue 1, 2022, Pages 49-63]
M.M. Youssef, Marwa A Review of Intelligent Control Systems for Grid Tie Doubly Fed Induction Generator Based Wind Farm [Volume 4, Issue 2, 2023, Pages 269-278]
M. O., Mousa Influence of Counterface Materials on the Tribological Behavior of Dental Polymethyl Methacrylate Reinforced by Single-Walled Carbon Nanotubes (SWCNT) [Volume 3, Issue 2, 2022, Pages 68-79]
M.O., Mousa Stress Analysis of Gear Pair Faults Using FEM [Volume 3, Issue 2, 2022, Pages 131-136]
Moaaz, Ahmed A Comparative Study of Different Control Methods for Anti-Lock Braking System (ABS) [Volume 2, Issue 1, 2021, Pages 27-34]
Mohamed, Ahmed Performance augmentation of PV panels using phase change material cooling technique: A review [Volume 2, Issue 2, 2021, Pages 1-13]
Mohamed, Amany Mohamed Effect of the tube material on the thermal performance of a Ranque-Hilsch vortex tube [Volume 1, Issue 1, 2020, Pages 37-44]
Mohamed, Amany Saker Towards a Sustainable Future: Exploring the Integration of Architecture Education, Innovation and Sustainability [Volume 5, Issue 1, 2024, Pages 49-63]
Mohamed, Essam Comparative Analysis between Two Different Control PWM Techniques Based on a Reduced-Component Multilevel Inverter [Volume 1, Issue 1, 2020, Pages 1-7]
Mohamed, Essam E. M. Review of Permanent Magnet Synchronous Motor Fed by Multilevel Inverter [Volume 1, Issue 1, 2020, Pages 22-31]
Mohamed, Essam E. M. Double Armature Partitioned Stator Switched Flux PM Machine for Electric Vehicle Applications [Volume 2, Issue 1, 2021, Pages 15-26]
Mohamed, Essam E. M. Performance assessment of speed controllers for Five-Phase PMSG with Integrated P&O MPPT algorithms Based Wind Energy Conversion Systems [Volume 3, Issue 2, 2022, Pages 58-67]
Mohamed, Hamdi Ali Comparative study on conventional and advanced techniques MPPT algorithms for solar energy systems [Volume 4, Issue 2, 2023, Pages 291-302]
Mohamed, Hassan Ibrahim Optimal flow pattern around hybrid groins with various orientations to improve fish habitat via Experimental Investigation using Acoustic Doppler Velocimeter [Volume 4, Issue 2, 2023, Pages 98-106]
Mohamed, Nehal Behavior and Correlations between different Mechanical Properties of Fly Ash-based Geopolymer Concrete [Volume 4, Issue 2, 2023, Pages 279-290]
Mohamed, Reem Abd Elkareem Techno-economic Analysis of Hybrid Renewable Energy Systems Considering Demand Side Management [Volume 5, Issue 2, 2024, Pages 62-85]
Mohamed, Shimaa AbdilWahab Implementation of Green Freight Transport approach in Egypt: A case study of Port Said ports [Volume 5, Issue 1, 2024, Pages 136-149]
Mohamed, Shuaiby Dynamic Performance Improvement of Pitch Angle Control Using PID and PIDA Controllers for Wind Generation Systems [Volume 1, Issue 1, 2020, Pages 32-36]
Mohammed, Abdil Rahman Nasr Implementation of Green Freight Transport approach in Egypt: A case study of Port Said ports [Volume 5, Issue 1, 2024, Pages 136-149]
Mohammed, Anmar Lazem Manufacture Dry Porous Carbonate Materials with Crack Free [Volume 4, Issue 2, 2023, Pages 187-193]
Mohammed, Sufyan A. Studying the bending behavior of polymer-based composites reinforced with wires of different geometric shapes by numerical analysis method [Volume 4, Issue 2, 2023, Pages 209-215]
Mohammed, Sufyan A. Hybridization influence on the mechanical properties of hybrid composite laminates: A review [Volume 5, Issue 1, 2024, Pages 64-70]
Mohammed Jaber, EL-Hussein Mechanical Properties of Soft Clay Soil Reinforced by Carbon Fibers [Volume 4, Issue 2, 2023, Pages 180-186]
Mohy, Hayam Dual Polarized Antenna with Wide Beamwidth Utilizing TM01 Mode for X-Band Applications [Volume 5, Issue 2, 2024, Pages 86-92]
Mostafa, Mona Mahmoud Optimal flow pattern around hybrid groins with various orientations to improve fish habitat via Experimental Investigation using Acoustic Doppler Velocimeter [Volume 4, Issue 2, 2023, Pages 98-106]
Mostafa Qutb, Seham Role of Strategic Environmental Assessment Tools (SEA) to Guide Strategic Plans in Egypt: New cities Case Study [Volume 2, Issue 2, 2021, Pages 55-62]
Mostfa, Ahmed A. A Systematic Review of the Event-Driven Activities in Social Applications [Volume 4, Issue 2, 2023, Pages 225-233]
Mourad, Asharf Nasr EL-Deen Modelling and Experimental Analysis for Performance Improvement of Photovoltaic Module using Different Cooling Systems [Volume 4, Issue 2, 2023, Pages 318-330]
Mousa, H.M. Membrane Technology for Groundwater Purification : A review [Volume 1, Issue 1, 2020, Pages 8-21]
Mousa, Hossam H. H. Machine Learning Method for Solar PV Output Power Prediction [Volume 3, Issue 2, 2022, Pages 123-130]
Mousa, Hossam H. H. A Comprehensive Study of Power Distribution Planning Perspectives: Modelling, Tools, Goals, and Criteria [Volume 5, Issue 2, 2024, Pages 7-17]
M. Rashid, Hayder Water Quality Detection using cost-effective sensors based on IoT [Volume 3, Issue 1, 2022, Pages 98-103]
M. Reda, Ahmed Experimental Investigation of a Novel Thermosyphon Solar Water Heater Performance under Aswan Climate Conditions [Volume 5, Issue 2, 2024, Pages 119-128]
M. Wahaballa, Amr Investigation of Xiaomi 11T Single-Frequency GPS Positioning for Static Applications [Volume 5, Issue 2, 2024, Pages 1-6]

N

Nabhan, Ahmed Stress Analysis of Gear Pair Faults Using FEM [Volume 3, Issue 2, 2022, Pages 131-136]
Nasr, Hatem A detailed Review of Solar Desalination Systems with Different Enhancement Methods [Volume 3, Issue 1, 2022, Pages 49-63]
Nasrallah, Mahmoud Smart Grid - reliability, Security, Self-healing standpoint, and state of the art [Volume 3, Issue 2, 2022, Pages 87-92]
Nasrallah, Mahmoud Micro Inverter Grid Connected for PV Application Based on SEPIC Differential Inverter [Volume 5, Issue 1, 2024, Pages 1-12]
Nasrat, Loai Optimal STATCOM for Performance Improvement of A Grid-Connected PV/Wind Hybrid Energy System: Case Study of Gabal El Zayt Region, Egypt [Volume 3, Issue 2, 2022, Pages 11-26]
Noby, Mohamed Urban Risk Assessments: Framework for Identifying Land-uses Exposure of Coastal Cities to Sea Level Rise, a Case Study of Alexandria [Volume 3, Issue 1, 2022, Pages 78-90]
Noureldeen, Omar An Overview of Control Method with Various Crowbar Techniques of Wind Turbines during Power System Faults [Volume 2, Issue 1, 2021, Pages 35-45]
Noureldeen, Omar A Review of Intelligent Control Systems for Grid Tie Doubly Fed Induction Generator Based Wind Farm [Volume 4, Issue 2, 2023, Pages 269-278]

O

Omar, Mostafa Review of Distributed power electronics solutions for PV Generation systems [Volume 4, Issue 1, 2023, Pages 85-90]
Ookawara, Shinichi Stepped Solar Stills’ Development and Improvement for Seawater Desalination [Volume 2, Issue 2, 2021, Pages 26-36]
Orabi, Mohamed High Robust Control Model of High Step Up Three Phase Y Source Inverters based on Model Predictive Control [Volume 4, Issue 2, 2023, Pages 76-83]

R

Raafat, Mohammed An Integrated IoT Smart Cane for the Blind and Visually Impaired Individuals [Volume 5, Issue 1, 2024, Pages 71-78]
Ragab, Ayman Energy Efficiency Coupled with Lightweight Bricks: Towards Sustainable Building: A review [Volume 4, Issue 1, 2023, Pages 1-28]
Ragab, Ayman The Effects of Courtyard Envelope on the Energy Required for Cooling in the Hot Desert Climate [Volume 4, Issue 2, 2023, Pages 155-164]
Ramzy, Khaled A detailed Review of Solar Desalination Systems with Different Enhancement Methods [Volume 3, Issue 1, 2022, Pages 49-63]
Rashid, Md Redowan Forms, Importance and Sources of Dissolved Organic Nitrogen (DON) in the Environment: A Review [Volume 5, Issue 2, 2024, Pages 18-27]
Rasslan, Ahmed AbdelMoety Ahmed Comparative Analysis of Machine Learning Techniques for Fault Detection in Solar Panel Systems [Volume 5, Issue 2, 2024, Pages 140-152]
Rekaby, Ahmed Experimental Investigation of a Novel Thermosyphon Solar Water Heater Performance under Aswan Climate Conditions [Volume 5, Issue 2, 2024, Pages 119-128]
Riyad, Riyadul Hashem Forms, Importance and Sources of Dissolved Organic Nitrogen (DON) in the Environment: A Review [Volume 5, Issue 2, 2024, Pages 18-27]

S

Sadek, Lamiaa Eied Numerical Simulation of Strip Footing Behavior on Reinforced Sabkha Soil [Volume 4, Issue 2, 2023, Pages 36-46]
Sadek, Mustafa Gamal A Review on Failure Analysis of Date Palm Fiber Reinforced Polymer Composites [Volume 5, Issue 1, 2024, Pages 99-110]
Sadek, Mustafa Gamal A Review on Properties, Applications and Feasibility Study of Date Palm Fiber-Reinforced Polymer Composites [Volume 5, Issue 2, 2024, Pages 50-61]
Safwat El-Hussieny, Engy The importance of combining sustainability and technology in the interior space [Volume 4, Issue 2, 2023, Pages 113-118]
Salah Hofny, Mohamed Injection and Combustion of biodiesel at different blends: A review [Volume 3, Issue 2, 2022, Pages 37-46]
Saleh, Ola Mostafa A. Modelling and Experimental Analysis for Performance Improvement of Photovoltaic Module using Different Cooling Systems [Volume 4, Issue 2, 2023, Pages 318-330]
Sameh, Hesham Energy Efficiency Coupled with Lightweight Bricks: Towards Sustainable Building: A review [Volume 4, Issue 1, 2023, Pages 1-28]
Samer Abdel Kader, Shimaa Proposed sustainable infrastructure criteria for achieving sustainable development in Egyptian cities: Using integrated gray, green, blue infrastructure approaches [Volume 3, Issue 2, 2022, Pages 106-115]
Seddeek, Muhammad Abdulrahman Structural and Non-structural Measures Integration through Multi-hazard Risk Approach - Sohag Governorate as an Example [Volume 4, Issue 2, 2023, Pages 303-317]
Sedek, Mohamed Saleh Semi-Automatic Approach for Forming and Processing Laser Sensing Data of Urban Truss [Volume 2, Issue 1, 2021, Pages 1-8]
Seleem, Abo-El Hagag A. Influence Parameters on the Essential Work of Fracture of 5754-H111 Aluminum Alloy Plate: Comparative Study [Volume 4, Issue 2, 2023, Pages 243-259]
Serwa, A. Semi-Automatic Approach for Forming and Processing Laser Sensing Data of Urban Truss [Volume 2, Issue 1, 2021, Pages 1-8]
Sharkawy, Abdel-Nasser A Comparative Study of Different Control Methods for Anti-Lock Braking System (ABS) [Volume 2, Issue 1, 2021, Pages 27-34]
Sharkawy, Abdel-Nasser Design and Implementation of a Prototype of Elevator Control System: Experimental Work [Volume 3, Issue 2, 2022, Pages 80-86]
Sharkawy, Abdel-Nasser Machine Learning Method for Solar PV Output Power Prediction [Volume 3, Issue 2, 2022, Pages 123-130]
Sharkawy, Abdel-Nasser A Systematic Review of the Event-Driven Activities in Social Applications [Volume 4, Issue 2, 2023, Pages 225-233]
Shmroukh, Ahmed N. Stepped Solar Stills’ Development and Improvement for Seawater Desalination [Volume 2, Issue 2, 2021, Pages 26-36]
Shmroukh, Ahmed N. Evaluation of New Composite Adsorbents for Solar-Driven Adsorption Refrigerator [Volume 2, Issue 2, 2021, Pages 76-81]
Shmroukh, Ahmed N. Energy and Exergy Analysis of the Heating Unit Components of Nag Hammadi Fiber Board Company [Volume 4, Issue 1, 2023, Pages 55-61]
Shmroukh, Ahmed N. An enhanced network design of natural gas pipelines by controlling gas flow: considering supply reliability and operation efficiency [Volume 4, Issue 1, 2023, Pages 91-99]
S. Hussein, Hany Micro Inverter Grid Connected for PV Application Based on SEPIC Differential Inverter [Volume 5, Issue 1, 2024, Pages 1-12]
Sulaiman, Eman M. A. Integrated combined cycle system with parabolic trough technology: A comprehensive review [Volume 4, Issue 2, 2023, Pages 194-208]

T

Tabassum, Sumaya An Investigation into the Efficacy of Septic Tank Systems in Removing Organics in a Subtropical Climate [Volume 5, Issue 1, 2024, Pages 125-135]
Tarafdar Hagh, Mehrdad Review of PV power ramp rate control methods and their requirements [Volume 2, Issue 2, 2021, Pages 14-25]
Tarek, Dalia Energy Efficiency Coupled with Lightweight Bricks: Towards Sustainable Building: A review [Volume 4, Issue 1, 2023, Pages 1-28]

W

W. Y., Ali Influence of Counterface Materials on the Tribological Behavior of Dental Polymethyl Methacrylate Reinforced by Single-Walled Carbon Nanotubes (SWCNT) [Volume 3, Issue 2, 2022, Pages 68-79]

Y

Yaseen, Dhafer Sabah A Systematic Review of the Event-Driven Activities in Social Applications [Volume 4, Issue 2, 2023, Pages 225-233]
Yasin, Hassan Membrane Technology for Groundwater Purification : A review [Volume 1, Issue 1, 2020, Pages 8-21]
Yehia, Sameh Behavior and Correlations between different Mechanical Properties of Fly Ash-based Geopolymer Concrete [Volume 4, Issue 2, 2023, Pages 279-290]
Yehia, Sameh Optimal Shape and Size of Holes in Hybrid Reinforced Concrete Beams [Volume 5, Issue 1, 2024, Pages 19-32]
Yousef, Ayman Energy Efficiency Coupled with Lightweight Bricks: Towards Sustainable Building: A review [Volume 4, Issue 1, 2023, Pages 1-28]
Youssef, Abdel-Raheem Review of Permanent Magnet Synchronous Motor Fed by Multilevel Inverter [Volume 1, Issue 1, 2020, Pages 22-31]
Youssef, Abdel-Raheem Performance assessment of speed controllers for Five-Phase PMSG with Integrated P&O MPPT algorithms Based Wind Energy Conversion Systems [Volume 3, Issue 2, 2022, Pages 58-67]
Youssef, Abdel-Raheem Techno-economic Analysis of Hybrid Renewable Energy Systems Considering Demand Side Management [Volume 5, Issue 2, 2024, Pages 62-85]

Z

Zahran, Mohamed Bayoumy Comprehensive Comparison Between the Experimental and Simulated characteristics of the Mono-Crystalline Silicon Solar Cell Using SCAPS-1D [Volume 4, Issue 2, 2023, Pages 165-172]